If you have a problem or need to report a bug please email :

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

FlowBoard Knight Rider LED's

A wide range of example files that you can load up in FlowStone

FlowBoard Knight Rider LED's

Postby admin » Thu Jun 09, 2011 3:46 pm

In this example we show the use of Buses in a simple Knight Rider type LED array sent to the FlowBoard DAQ LED Board.

An up/down counter is fed from a 100 Hz Tick, which is divided down using a slider to set the speed.

The output from the counter is decoded into individual bits and then added to a 8ch bus. The individual bus channels are then extracted at each graphical LED and also sent to the FlowBoard DAQ for the real LED's.

There is also a persistence knob that controls the pulse width simulation the true Knight Rider Effect!

Also note the use of Synchronized modules (using Paste Synchronized) for the LEDS and the Persistence pulse modules. This means that if you edit any of the Synchronized modules they all get the same changes, which is a great help if they all need to be the same.
FlowBoard Knight Rider LEDs.fsm
FlowBoard Led's
(28.35 KiB) Downloaded 3637 times
User avatar
Site Admin
Posts: 231
Joined: Tue May 11, 2010 6:30 pm

Return to FlowStone Examples

Who is online

Users browsing this forum: No registered users and 1 guest