If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
LynxMotion Return Messages
1 post
• Page 1 of 1
LynxMotion Return Messages
by admin » Fri Sep 10, 2010 10:49 pm
This example shows how to read the status messages returned from the LynxMotion SSC-32 servo board.
1st Make a request by sending the correct request code to the board: Eg.
VER <CR>- returns the firmware version of the board.
VA <CR>- returns the analogue voltage on input pin A
VB <CR> - returns the analogue voltage on input pin B
VC <CR> - returns the analogue voltage on input pin C
VD <CR>- returns the analogue voltage on input pin D
etc.
2nd Capture the returned messages in a buffer
Since the LynxMotion board has no sting terminator on returned messages, each character is received separately and needs to be buffered in order to be reconstructed!
1st Make a request by sending the correct request code to the board: Eg.
VER <CR>- returns the firmware version of the board.
VA <CR>- returns the analogue voltage on input pin A
VB <CR> - returns the analogue voltage on input pin B
VC <CR> - returns the analogue voltage on input pin C
VD <CR>- returns the analogue voltage on input pin D
etc.
2nd Capture the returned messages in a buffer
Since the LynxMotion board has no sting terminator on returned messages, each character is received separately and needs to be buffered in order to be reconstructed!
- Attachments
-
LynxMotion Return Messages.fsm- LynxMotion Return Messages V1.01
- (10.12 KiB) Downloaded 3086 times
-
admin - Site Admin
- Posts: 231
- Joined: Tue May 11, 2010 6:30 pm
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests