LynxMotion Mini Terminal
Posted: Mon Sep 13, 2010 11:53 pmIn this example you can directly type the servo commands into a terminal window for the LynxMotion SSC-32 board.
Example:
#0 P1500 (Set servo 0 to pulse width 1500 = center)
VER (Request firmware version)
VD (Request the A/D I/P 'D' level)
Example:
#0 P1500 (Set servo 0 to pulse width 1500 = center)
VER (Request firmware version)
VD (Request the A/D I/P 'D' level)