Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

Coefs - Biquad?

For general discussion related FlowStone

Coefs - Biquad?

Postby lalalandsynth » Tue Jun 18, 2019 6:21 pm

Can someone explain to me how I can use the Coefs and Biquad module and the relevant coefficients to make a filter ?
And do I need to stack them to make a proper filter ?
Also , why do they have stream inputs ?

As In when I hook it up its just a lowpass filter

Sorry for the basic nature of these questions but I want to learn :)
User avatar
lalalandsynth
 
Posts: 600
Joined: Sat Oct 01, 2016 12:48 pm

Re: Coefs - Biquad?

Postby martinvicanek » Tue Jun 18, 2019 8:10 pm

There are various prims in FS:

Biquad is a lowpass filter, however it is buggy for low corner frequencies.

2P2Z is a generic biquad with 2 poles and 2 zeros. Watch out when taking coefficients from the literature: the a's and b's are the other way around!

Coefs is a lowpass coefficient calculator which may be placed before the 2P2Z prim. Unfortunately this module is also buggy at low frequencies.

The coefficient inputs are of the stream type to allow continuous modulation. However do not modulate too fast else your filter will run away and kill the audio stream. For fast modulation I recommend the ZDF topology.

If you stack two filters (in series) you get a steeper filter.

You can create your own filter using the RBJ audio cookbook.

You might want to check my Optmized Biquad Filters at FS Guru, too.
User avatar
martinvicanek
 
Posts: 1315
Joined: Sat Jun 22, 2013 8:28 pm

Re: Coefs - Biquad?

Postby lalalandsynth » Tue Jun 18, 2019 8:34 pm

i wonder if the 2P2Z has been removed from the Alpha , cannot find it ?

And yes,I noticed the A0 , which should be B0 right ?
User avatar
lalalandsynth
 
Posts: 600
Joined: Sat Oct 01, 2016 12:48 pm

Re: Coefs - Biquad?

Postby wlangfor@uoguelph.ca » Wed Jun 19, 2019 12:44 am

Has FS Furu overcome the https certificate issue?

martinvicanek wrote:There are various prims in FS:

Biquad is a lowpass filter, however it is buggy for low corner frequencies.

2P2Z is a generic biquad with 2 poles and 2 zeros. Watch out when taking coefficients from the literature: the a's and b's are the other way around!

Coefs is a lowpass coefficient calculator which may be placed before the 2P2Z prim. Unfortunately this module is also buggy at low frequencies.

The coefficient inputs are of the stream type to allow continuous modulation. However do not modulate too fast else your filter will run away and kill the audio stream. For fast modulation I recommend the ZDF topology.

If you stack two filters (in series) you get a steeper filter.

You can create your own filter using the RBJ audio cookbook.

You might want to check my Optmized Biquad Filters at FS Guru, too.
My youtube channel: DSPplug
My Websites: www.dspplug.com KVRaudio flowstone products
User avatar
wlangfor@uoguelph.ca
 
Posts: 912
Joined: Tue Apr 03, 2018 5:50 pm
Location: North Bay, Ontario, Canada


Return to General

Who is online

Users browsing this forum: No registered users and 46 guests