VOX AC30 guitar combo amplifier emulation
Posted: Wed Dec 27, 2023 6:02 pm
Hi all! Finally I think I have finished my work. I bring to your attention an emulation of the VOX AC30 Tone Booster guitar combo amplifier, made in the FS v3.0.9b2 environment. The amplifier consists of 2 channels: Normal and Tone Booster. The difference from the original circuit is that I added another tube stage to each of the channels in order to increase the degree of distortion, because It seemed to me that the original scheme did not have enough of it, at least for me. The front panel is a pre-amplifier. When you click on the logo, you go to the Power Amplifier panel and select cabinets. The Damp control is a dynamic attenuator at a frequency of about 3 kHz, depending on both the signal level and the position of the SAG knob also. SAG regulates both the degree of compression and the dynamic level of distortion. The power amplifier has 3 positions: class A, AB and Grid. It would be possible to do this without Grid in relation to this amplifier. However, Grid was conceived by me as an addition to the Hi Gain amplifier and I decided to leave it, despite the fact that it is still unfinished. However, this is not a Hi Gain amplifier. I didn't use impulses in the cabs. I formed them using filters. It was more convenient for me this way. Please leave comments, including unflattering ones. This will help me in future work. And also, I would ask you to help me translate my work into the VST3 plugin, because... I don't have a very good idea how to do this. Happy holidays to everyone and wish you peace, happiness and prosperity!