Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

X10 Home Automation Lamp Test

X10 Home Automation Lamp Test

Postby admin » Thu Nov 17, 2011 9:10 pm

In this example FlowStone sends out the X10 commands to the Marmitek CM15 Pro USB X10 Controller to turn a simple lamp on and off from a switch on screen.

cm15__57745_zoom.jpg
cm15__57745_zoom.jpg (59.37 KiB) Viewed 29854 times


The lamp address is set to A1

X10 Commands used are:

A1 on
A1 off

Simple!

x10 Lamp Test clip.png
x10 Lamp Test clip.png (25.13 KiB) Viewed 29854 times


You will also need the Active Home SDK installed:
ahsdk_install.zip
(7.42 MiB) Downloaded 2993 times
Attachments
x10 Lamp Test.fsm
(4.57 KiB) Downloaded 2833 times
User avatar
admin
Site Admin
 
Posts: 231
Joined: Tue May 11, 2010 6:30 pm

Return to X10 Home Automation

Who is online

Users browsing this forum: No registered users and 1 guest