If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
X10 Home Automation Lamp Test
1 post
• Page 1 of 1
X10 Home Automation Lamp Test
In this example FlowStone sends out the X10 commands to the Marmitek CM15 Pro USB X10 Controller to turn a simple lamp on and off from a switch on screen.
The lamp address is set to A1
X10 Commands used are:
A1 on
A1 off
Simple!
You will also need the Active Home SDK installed:
The lamp address is set to A1
X10 Commands used are:
A1 on
A1 off
Simple!
You will also need the Active Home SDK installed:
- Attachments
-
- x10 Lamp Test.fsm
- (4.57 KiB) Downloaded 2853 times
-
admin - Site Admin
- Posts: 231
- Joined: Tue May 11, 2010 6:30 pm
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests