If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
zero at request and radiobutton
8 posts
• Page 1 of 1
zero at request and radiobutton
hi all, here i want share a little useful module called zero at request,
it is a small module which sets the output to the input value when this is changed, while it gives zero when it gets requested from outside (when it gets a reverse trigger)
this can be very useful if you have lots of sources (at different places) from where you need to get the last value,
instead of creating big 'last module' chains where you always need the specific source, you simply can add all sources to one connector and it will always show you the last changed value
in the example you can find a simple radiobutton selector which saves its state in the presets using this methode
hope you find it useful
it is a small module which sets the output to the input value when this is changed, while it gives zero when it gets requested from outside (when it gets a reverse trigger)
this can be very useful if you have lots of sources (at different places) from where you need to get the last value,
instead of creating big 'last module' chains where you always need the specific source, you simply can add all sources to one connector and it will always show you the last changed value
in the example you can find a simple radiobutton selector which saves its state in the presets using this methode
hope you find it useful
- Attachments
-
- zero at request and Radiobutton.fsm
- (21.93 KiB) Downloaded 1130 times
Last edited by Nubeat7 on Wed Jun 03, 2015 9:13 pm, edited 1 time in total.
-
Nubeat7 - Posts: 1347
- Joined: Sat Apr 14, 2012 9:59 am
- Location: Vienna
Re: zero at request and radiobutton
Hehehe... that's clever, never thought about that.
Just a side note, have a look at this:
The connection order on that marked output is in my opinion wrong. Not sure why it works in spite of that.
Just a side note, have a look at this:
The connection order on that marked output is in my opinion wrong. Not sure why it works in spite of that.
-
MyCo - Posts: 718
- Joined: Tue Jul 13, 2010 12:33 pm
- Location: Germany
Re: zero at request and radiobutton
you are right Myco should be xchanged, it also works without this first triggerblocker, i just placed it there to avoid a double trigger at the last input, thanks for spotting..
just reuploaded the schematic to fix this little thing
just reuploaded the schematic to fix this little thing
-
Nubeat7 - Posts: 1347
- Joined: Sat Apr 14, 2012 9:59 am
- Location: Vienna
Re: zero at request and radiobutton
Awesome Rene...
Just implemented this in my actual project:
less links and even preset 'for free'
keep on doing!
Walter
Just implemented this in my actual project:
less links and even preset 'for free'
keep on doing!
Walter
- Attachments
-
- Radio Buttons & 0 at request by nubeat7_s.jpg (1.5 KiB) Viewed 22455 times
-
Walter Sommerfeld - Posts: 249
- Joined: Wed Jul 14, 2010 6:00 pm
- Location: HH - Made in Germany
Re: zero at request and radiobutton
great that you like it walter, good looking buttons!
it also works well without the presetparameter-primitive, if you need it to change views for example, where no presets are needed, just keep the wireless "set"-sender!
it also works well without the presetparameter-primitive, if you need it to change views for example, where no presets are needed, just keep the wireless "set"-sender!
-
Nubeat7 - Posts: 1347
- Joined: Sat Apr 14, 2012 9:59 am
- Location: Vienna
Re: zero at request and radiobutton
...thanks 4 the hint!
Glad u like the Butts
cheers
Glad u like the Butts
cheers
-
Walter Sommerfeld - Posts: 249
- Joined: Wed Jul 14, 2010 6:00 pm
- Location: HH - Made in Germany
Re: zero at request and radiobutton
the magic of trig order
- Tronic
- Posts: 539
- Joined: Wed Dec 21, 2011 12:59 pm
Re: zero at request and radiobutton
Tronic wrote:the magic of trig order
hehe, and the lovely "reverse triggers"
which is btw. is tricky when you don't use the presetparameter primitive, then you need a sample and hold before you use the output, because if any reverse trigger happens you get zero!
as the name of the module says
-
Nubeat7 - Posts: 1347
- Joined: Sat Apr 14, 2012 9:59 am
- Location: Vienna
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 31 guests