Support

If you have a problem or need to report a bug please email : support@dsprobotics.com

There are 3 sections to this support area:

DOWNLOADS: access to product manuals, support files and drivers

HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects

USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here

NEW REGISTRATIONS - please contact us if you wish to register on the forum

Saturn - A 6 voice Polysynth (updated)

Post any examples or modules that you want to share here

Re: Saturn - A 6 voice Polysynth (updated)

Postby Halon » Mon Jun 10, 2019 5:14 pm

Yes i found it. It should be fixed now.
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Re: Saturn - A 6 voice Polysynth (updated)

Postby trogluddite » Mon Jun 10, 2019 5:59 pm

Nice! The blue GUI option especially is much easier on my eyes.
All schematics/modules I post are free for all to use - but a credit is always polite!
Don't stagnate, mutate to create!
User avatar
trogluddite
 
Posts: 1727
Joined: Fri Oct 22, 2010 12:46 am
Location: Yorkshire, UK

Re: Saturn - A 6 voice Polysynth (updated)

Postby Halon » Mon Jun 10, 2019 6:19 pm

Thats great to hear ;)
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Re: Saturn - A 6 voice Polysynth (updated)

Postby Spogg » Tue Jun 11, 2019 9:35 am

Very nice!

Do you plan any more changes (such as that pesky pitchbend knob scale) or is it finished and ready for me to put on Flowstoners?

Cheers

Spogg
User avatar
Spogg
 
Posts: 3318
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England

Re: Saturn - A 6 voice Polysynth (updated)

Postby Halon » Tue Jun 11, 2019 10:43 am

Spogg wrote:Very nice!

Do you plan any more changes (such as that pesky pitchbend knob scale) or is it finished and ready for me to put on Flowstoners?

Cheers

Spogg


The pitch bend scales according to knob position now, if not im being really dense and misunderstood what you meant. :oops:
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Re: Saturn - A 6 voice Polysynth

Postby wlangfor@uoguelph.ca » Tue Jun 11, 2019 3:23 pm

Thanks Spogg, useful.

Spogg wrote:I added a range limiter (attached) between the output of the pitch to frequency prim and the cutoff inputs to the 2 filters. This prevents the requested cutoff frequency going above 1 (I actually set it to 0.99). If you do exceed this I found that filters often misbehave, since you are asking for something above Nyquist. With some filters I found this limit needs to be even lower, but it doesn’t normally affect the sound unless you drop below a maximum of 0.5 (approx. 11kHz).
That seems to have resolved the problem. Of course if you set very fast changes, like from the fastest envelope attack time, some filters seem to click more than others. If that’s an issue you could always set a minimum Attack time of say 10mS (about 400 samples).

Cheers

Spogg
My youtube channel: DSPplug
My Websites: www.dspplug.com KVRaudio flowstone products
User avatar
wlangfor@uoguelph.ca
 
Posts: 912
Joined: Tue Apr 03, 2018 5:50 pm
Location: North Bay, Ontario, Canada

Re: Saturn - A 6 voice Polysynth (updated)

Postby Spogg » Wed Jun 12, 2019 9:14 am

Halon wrote:The pitch bend scales according to knob position now, if not im being really dense and misunderstood what you meant. :oops:


It’s really only a very minor point. When the knob is at max the scale says 10 but the pitchbend is 12, that’s all.
It’s quite likely that most users won’t notice it; I was just being a bit picky I guess.

So if you’re happy with it being finished, I’ll upload it…

Cheers

Spogg
User avatar
Spogg
 
Posts: 3318
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England

Re: Saturn - A 6 voice Polysynth (updated)

Postby Halon » Wed Jun 12, 2019 4:05 pm

Im actually happy with it. You could upload it if you want :)
Halon
 
Posts: 321
Joined: Sat Nov 28, 2015 4:42 pm
Location: Norway

Re: Saturn - A 6 voice Polysynth (updated)

Postby Spogg » Fri Jun 14, 2019 10:11 am

I’ve put in the Flowstoners website in the Flowmates section. Newest additions are always at the bottom of the list.

http://flowstoners.com/flowmates

Let me know if it’s all ok with you, or if you want something added or changed.

Cheers

Spogg
User avatar
Spogg
 
Posts: 3318
Joined: Thu Nov 20, 2014 4:24 pm
Location: Birmingham, England

Re: Saturn - A 6 voice Polysynth (updated)

Postby Phil Thalasso » Fri Jun 14, 2019 1:12 pm

Hi all, hi Halon,

just came back from a trip and want to thank you for sharing. I'm sure I'll have fun with it this week-end and want to add that I really like the GUI.

Best Regards
Phil
User avatar
Phil Thalasso
 
Posts: 148
Joined: Tue Jun 27, 2017 12:42 pm
Location: Munich, Germany

PreviousNext

Return to User Examples

Who is online

Users browsing this forum: No registered users and 25 guests