If you have a problem or need to report a bug please email : support@dsprobotics.com
There are 3 sections to this support area:
DOWNLOADS: access to product manuals, support files and drivers
HELP & INFORMATION: tutorials and example files for learning or finding pre-made modules for your projects
USER FORUMS: meet with other users and exchange ideas, you can also get help and assistance here
NEW REGISTRATIONS - please contact us if you wish to register on the forum
Discuss
1 post
• Page 1 of 1
Discuss
Hi!
I thought I'd ask about one of my areas of work-string winding.I would like to oscillate between 2 limit switches to flat wind the roll.This carrier goes in the transverse machine direction and feeds the string onto the core.
I was wondering if SM caters for 1/4hp-180 watts servo motors?
Also I was wondering how much this would cost me not including FS.What hardware do I need?I have done this once before it was Baldor's solution, and cost $500.
Thanks.
I thought I'd ask about one of my areas of work-string winding.I would like to oscillate between 2 limit switches to flat wind the roll.This carrier goes in the transverse machine direction and feeds the string onto the core.
I was wondering if SM caters for 1/4hp-180 watts servo motors?
Also I was wondering how much this would cost me not including FS.What hardware do I need?I have done this once before it was Baldor's solution, and cost $500.
Thanks.
- MaxPayne
- Posts: 1
- Joined: Sat Aug 17, 2019 10:11 pm
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 23 guests